Garrett G45 Turbine Housing Kits
From $1,114.82
BACK TO CATALOG COMPRESSOR MAP EXHAUST FLOW CHART FLANGE DIAGRAM
Garrett
Garrett G-Series II G45-1610 79mm Turbocharger
$4,790.90
SPECIAL ORDER
TURBINE HOUSING
PRODUCT DETAILS
The G-Series II G45-1610 79mm is part of Garrett's G-Series II line, the second generation of the G-Series. Its revised compressor wheel flows up to 10 percent more air than the first-generation G-Series at peak pressure ratio and peak shaft speed, with better efficiency at high flow. To turn that extra flow into more power, the engine needs to be recalibrated. G-Series II shares its compressor and turbine housings with the first-generation G-Series, so an existing Gen I turbo can be upgraded by replacing only the center housing rotating assembly (CHRA).
Garrett rates the G-Series II G45-1610 79mm for 750 to 1,610 horsepower on 2.0 to 8.0 liter engines.
Key Specifications
- Series — G-Series II
- Frame size — 45 frame
- Horsepower rating — 750–1,610 hp (Garrett rating)
- Engine displacement — 2.0–8.0 L
- Compressor wheel — 79 mm inducer, 98 mm exducer, 65 trim, 0.85 A/R housing
- Turbine wheel — 89 mm inducer, 82 mm exducer, 84 trim
- Center housing — Oil and water cooled
- Maximum turbo speed — 120,000 rpm
- Supercore part number — 938339-5004S
- CHRA part number (standard rotation) — 938338-5004S
Turbine Housing Options
Each turbine housing is listed by A/R (area-to-radius ratio), inlet flange, outlet and wastegate type. "Internal" housings have a built-in wastegate; "External" housings are free-float designs that require an external wastegate.
| Garrett part number | A/R | Inlet | Outlet | Wastegate | Divided |
|---|---|---|---|---|---|
| 757707-0019 | 1.01 | V-Band | V-Band | External | No |
| 757707-0020 | 1.15 | V-Band | V-Band | External | No |
| 757707-0021 | 1.28 | V-Band | V-Band | External | No |
| 757707-0022 | 1.44 | V-Band | V-Band | External | No |
| 757707-0023 | 1.01 | T4 | V-Band | External | Yes |
| 757707-0024 | 1.15 | T4 | V-Band | External | Yes |
| 757707-0025 | 1.28 | T4 | V-Band | External | Yes |
| 757707-0026 | 1.44 | T4 | V-Band | External | Yes |
Important Information
Garrett calculates its horsepower ratings from the compressor map choke flow, which represents the potential flywheel horsepower of the turbo. Actual results depend on the engine, supporting modifications and calibration.
Garrett sets the maximum allowable speed for this turbo at 120,000 rpm. Operating above that speed can damage the turbo and cause premature failure. A turbo speed sensor (sold separately) lets you monitor shaft speed.
For race vehicles only. Not for use on public roads.
Installation and Tuning Available at Race Protocol
Turbo system design, installation and dyno tuning are available in house. Call (724) 732-8948 to discuss your build.
