G5 Voodoo Neo 6

The next generation of engine management.

The Link G5 Voodoo Neo 6 runs 8 cylinders with port or direct injection and direct spark, or 6 cylinders with direct/port staged injection and direct spark. The G5 Voodoo processing units are the perfect choice for professional-level motorsport.

Configurations

• ECU Only — 156-5000 - G5 Voodoo Neo 6 ECU.
• + DI Driver-4 — 156-9000B - G5 Voodoo Neo 6 ECU with one 144-5000 - DI Driver-4 module (controls up to 4 direct injectors).
• + 2 x DI Driver-4 — 156-9200B - G5 Voodoo Neo 6 ECU with two 144-5000 - DI Driver-4 modules (controls up to 8 direct injectors).

Key Features

• New comms module — up to 10x faster log file downloads, from minutes to seconds, with enhanced WiFi and GPS.
• Built-in ethernet — the fastest, most stable way to view or download logs and tune.
• 1 GB onboard logging — in the data storage unit.
• Onboard wideband — one built-in wideband lambda controller.
• Direct injection capable — including staged port-DI.
• Highly customisable IO — ADIO pins plus Injector/Digital-Input pins that can act as inputs or outputs.
• Dual H-Bridge e-throttle control — drive-by-wire and low power e-wastegates.
• CNC sealed enclosure — 68 pins total via Link A and B 34-pin superseal connectors.
• Power over USB — firmware updates and initial setup at your PC.
• Runs PC Link — the same software as G4X; open G4X and G5 log and map files together.

Specifications

• Drives — 12 injector pins, 8 ignition pins, 6 aux output pins (4 injector pins shared with DI pins), 6 ADIO pins.
• Inputs — 3 analog, 10 digital, 4 temperature, 2 knock, 2 trigger, dedicated ignition switch pin, 5V sensor supply.
• Communications — USB-C, WiFi access point, CAN via WEIPU connector (supplies power and ground), GPS, ethernet, K-line support.
• Enclosure — CNC machined, sealed, with through holes and threaded side/underside mounting.

What's in the Box

• G5 Voodoo Neo 6 ECU
• USB-C connection cable
• WiFi antenna
• 4 m GPS antenna (magnetic or adhesive mount)
• USB-C and SMA dust covers
• QuickStart guide and installer I/O table
• Link stickers
• DI Driver-4 module(s) when a bundle configuration is selected.

Requires "A" & "B" connector kits — not supplied.

Installation and Configuration available at Race Protocol

Authorized Link Engine Management dealer with in-house installation, wiring and calibration. Call (724) 732-8948 to discuss your build.