FIC BMW M2 / M3 / M4 S55 (F80/F82/F87) Injector Sets

Fuel Injector Clinic matched injector set for BMW M2 / M3 / M4 S55 (F80/F82/F87). Each set contains six high-impedance injectors. Choose the flow rate and connector option that suit your build.

Every injector is flow tested and individually serial-numbered, and each set includes a Data Match Sheet showing the flow and latency results for every injector. Flow is rated at 43.5 psi (3 bar) and 90°F using CF-16B calibration fluid.

Specifications

• Application: BMW M2 / M3 / M4 S55 (F80/F82/F87)
• Injectors per set: 6
• Flow rates available (at 43.5 psi): 540, 660, 850, 1000, 1200, 1440, 1650 and 2150 cc/min per injector
• Impedance: High (saturated)
• Injector electrical connector: EV6 / USCAR (540, 660, 850, 1000, 1200 and 1440 cc/min); EV1 / Jetronic (1200 and 1650 cc/min); Denso (2150 cc/min)
• Connector options: a direct fit to the stock harness, solder-in pigtails and plug-and-play adapters to the stock harness, depending on the flow rate selected
• Warranty: Lifetime warranty against failure caused by defects in original manufacture

Fuel Compatibility

All flow rates except 2150 cc/min are compatible with all gasoline and alcohol fuels, including pump gasoline, E85 and race fuels such as Q16, VP Import and FTW.

2150 cc/min: compatible with all gasoline and alcohol fuels except MTBE-oxygenated fuels such as Q16 and VP Import. MTBE makes an internal O-ring swell, which can reduce the injector's flow by as much as 30%. Flow returns to normal once fuel without MTBE is run through the injector, but running MTBE fuels with this injector is not recommended.