Link MAP Sensor (MAP1.15 / MAP2.5 / MAP3 / MAP4)

Overview

Link MAP (Manifold Absolute Pressure) sensors are available in four pressure ranges — 1.15 Bar, 2.5 Bar, 3 Bar and 4 Bar — so you can match the sensor to your engine’s boost level. Select your range from the options above. The wiring pinout is marked directly on the housing.

Pressure Range Options

• MAP1.15 — 1.15 Bar absolute: naturally aspirated engines, or applications with positive intake pressure up to approx. 0.15 Bar (2 PSI), e.g. ram-air. Highest resolution for NA engines. Select ‘Link 1.15 Bar’ in PC Link.
• MAP2.5 — 2.5 Bar absolute: forced induction up to approx. 1.5 Bar (22 PSI) boost. Select ‘Link 2.5 Bar’ in PC Link.
• MAP3 — 3 Bar absolute: forced induction up to approx. 2.0 Bar (29 PSI) boost. Select ‘Link 3 Bar’ in PC Link.
• MAP4 — 4 Bar absolute: high-boost applications up to approx. 3.0 Bar (44 PSI). Select ‘Link 4 Bar’ in PC Link.

Key Features

• Includes 3-pin Deutsch DTM connector kit
• Easy to mount via 2 bolt holes. The sensor should be mounted higher than the intake manifold port that the hose connects to.
• Compact aluminium enclosure
• Mechanical connection via 4mm (3/16″) hose connector nipple
• Compatible with Link G4/G4+/G4X ECUs — set the matching MAP sensor type in PC Link

Installation and Configuration available at Race Protocol

Authorized Link Engine Management dealer with in-house installation, wiring and calibration. Call (724) 732-8948 to discuss your build.